9. Set the polling box to erase or keep the document after polling.
SET
SET
10. You can repeat this procedure to set up another polling box.
Scanning a Document into the Memory for Polling Sending
Follow this procedure to scan a document into the polling box. The document
will remain in the polling box to be polled by other fax units.
1. Set the document on the fax. (Q6-3)
2. Open both One-touch Speed Dialling panels. Then press POLLING.
POLLING
Chapter 11
Press SET.
Press the search buttons to display the setting you want.
ERASE AFTER TX
ERASE AFTER TX
ON
The document in the memory box is erased after it is sent once in
response to polling by another fax.
OFF
The document in the memory box is not erased after it is polled.
Select this setting if you expect the document will be polled by more
than one fax.
With the selection you want displayed, press SET.
-or-
Press STOP to return to standby.
Set the document resolution, contrast, and document type. (Q6-4)
You can select a sender's name with the TTI SELECTOR. (Q6-6)
POLLING
1.POLLING TX
ON
OFF
Setting Up and Using Polling
11-17