General Information; Introduction - Agilent Technologies 8511B Operating And Service Manual

1

Introduction

NOTE

General Information

This manual for the Agilent 8511B frequency converter test set is used in
conjunction with the Agilent 8510 network analyzer manual set. These
manuals provide the information needed to properly configure your system
and make measurements.
The 8511B manual may be inserted into the 8510 test sets and accessories
binder that was provided with your 8510 manual set.
The 8511B Operating portion consists of:
•
General Information
•
Specifications
•
Installation
•
Operation
•
Performance Tests
The 8511B Service portion consists of:
•
Troubleshooting
•
Replacement procedures
•
Replaceable parts
First. Read the chapters titled "General Information" and "Installation."
These chapters include information on site preparation, unpacking and
inspecting your instrument for damage, safety considerations, and
configuring your test set to the 8510.
Second. Read the chapters of the Agilent 85056 Calibration Kit Manual, that
pertain to the care, cleaning, gaging, and connection of precision 2.4 mm
devices. This information will help you make good connections and care for
your precision devices, and to maintain the performance of your test set and
network analyzer system.
Third. Read the chapter titled "Operation." This chapter will acquaint you
with the front and rear panel features of your test set. Also included is
information on controlling multiple test sets, using the anti-rotation clamps,
and connecting devices to the test set.
Agilent 8511B Test Set Operating and Service Manual 1-1