Firewall Log - Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Configuring with Web Based Management
4.3 "Information" menu
4.3.5.3

Firewall Log

The firewall log logs the events that occurred on the firewall. When you create firewall
rules, you can specify the event severity with which they are logged.
Description
• Severity Filters
You can filter the entries in the table according to severity. To display all the entries,
enable or disable all parameters.
Note
For each severity, a maximum of 400 entries in the table are possible. If the maximum
number of entries is reached for a severity, the oldest entries of this severity are
overwritten in the table. The table remains permanently in the memory.
– Critical
– Warning
– Info
88
Critical
When this parameter is enabled, all entries of the category "Critical" are displayed.
warning
When this parameter is enabled, all entries of the category "Warning" are
displayed.
Informative
When this parameter is enabled, all entries of the category "Info" are displayed.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03