Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 201

• OperState
Displays the current operational status. The operational status depends on the
configured "Status" and the "Link". The following options are possible:
– Up
– Down
• Link
Shows the connection status to the network. With the connection status, the
following is possible:
– Up
– Down
• Mode
Shows the transfer parameters of the port.
• Negotiation
Shows whether the automatic configuration is enabled or disabled.
• Flow Ctrl. Type
Shows whether flow control is enabled or disabled for the port.
• Flow Ctrl.
Shows whether or not flow control is working on this port.
• MAC Address
Shows the MAC address of the port.
• Blocked by
Shows why the port is in the "blocked" status:
– -
– Admin down
– Link down
– Power down
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
You have configured the status "enabled" for the port and the port has a valid
connection to the network.
You have configured the status "disabled" or "Link down" for the port or the port
has no connection.
The port has a valid link to the network, a "link integrity signal" is being received.
The link is down, for example because the connected device is turned off.
The port is not blocked.
The status "disabled" is configured for the port, see "System > Ports >
Configuration".
The status "enabled" is configured for the port but there is no connection, see
"System > Ports > Configuration".
The status "Link down" is configured for the port, see "System > Ports >
Configuration".
Configuring with Web Based Management
4.4 "System" menu
201