Snmpv3 Views - Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

4.4.9.5

SNMPv3 Views

Configuration of SNMPv3 views
You configure the parameters of SNMP views on this WBM page.
Note
Controlling the SNMPv1 and SNMPv2c access
The preconfigured SIMATICNETRD and SIMATICNETWR views are used internally to
control the SNMPv1 and SNMPv2c access. If you delete or change these views, this
directly affects the SNMPv1 and SNMPv2c access.
Description
The page contains the following boxes:
• View Name
Select the name of the view that you want to configure. An SNMPv3 view always
needs to be assigned to an SNMPv3 access. For this reason, you need to enter a new
SNMPv3 view in the table in the "SNMP Access" tab.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
Configuring with Web Based Management
4.4 "System" menu
173