Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 136

Configuring with Web Based Management
4.4 "System" menu
required for the diagnostics in STEP 7 Basic/Professional. You can export a corrected
configuration and load it as "SINEMAConfig" again using the WBM.
• For configuration
No connection to a real device is required to configure a device in STEP 7
Basic/Professional. You can export the configuration and load it as "SINEMAConfig"
to the real device using the WBM.
X509 certificates
The following file types can be loaded into the device:
• .crt, pem, zip: Maximum file name length 255 characters
• .p12: Maximum file name length 248 characters
Description
The table has the following columns:
• Type
Shows the file type.
• Description
Shows the short description of the file type.
• Load
With this button, you can upload files to the device. The button can be enabled, if this
function is supported by the file type.
136
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03