Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 329

• Operation
Specify who establishes the VPN connection. You will find more detailed information
in "Technical basics > VPN connection establishment (Page 64)".
– Disabled
– start
– wait
– on demand
– start on DI
– wait on DI
• Keying Protocol
Specify whether IKEv2 or IKEv1 will be used.
• Interface
Select the interface via which a VPN connection is being established.
• Remote End
Select the required remote station. Only partners that have been configured on the
"Remote End" WBM page can be configured.
• Local Subnet
Enter the local subnet. Use the CIDR notation. The local network can also be a single
PC or another subset of the local network. Multiple subnets can be used only with
IKEv2. In this case, enter the subnets separated by a comma.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
The VPN connection is disabled.
The device attempts to establish a VPN connection to the partner.
The device waits for the partner to initiate the connection establishment.
The VPN connection is established when necessary.
If the event "Digital In" occurs, the device attempts to establish a VPN connection
to the partner.
This is on condition that the event "Digital In" is forwarded to the VPN connection.
For this purpose, enable "VPN tunnel" for the "Digital In" event under "System" >
"Events" > "Configuration".
If the event "Digital In" occurs, the device waits for the partner to initiate
connection establishment.
This is on condition that the event "Digital In" is forwarded to the VPN connection.
This is on condition that the event "Digital In" is forwarded to the VPN connection.
For this purpose, enable "VPN tunnel" for the "Digital In" event under "System" >
"Events" > "Configuration".
Configuring with Web Based Management
4.7 "Security" menu
329