Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 257

The table has the following columns:
• Select
Select the row you want to delete.
• Bridge-ID
Shows the bridge ID.
• Transparent
When you enable this option, the Inter-VLAN Bridge and the associated VLANs are
switched to transparent mode when the bridge is activated. Ports belonging to the
bridge become transparent ports. This means the following:
– Tagged frames that are received at these ports are not evaluated and are
– Untagged frames that are received at these ports are also forwarded to all other
– As long as the transparent bridge is enabled, you cannot change the port
The prerequisite for this is that the port VLAN ID of all ports belonging to the VLAN is
set to the VLAN ID.
If you disable this option, the VLAN tags are evaluated.
• Enable
Enables the bridge between the VLANs specified in the "Configuration" tab. After it
has been enabled, the bridge adopts the IP address configuration of the VLANs for
which the Type "Master" was selected in the "Configuration" tab. The devices of the
VLANs can no longer be reached at their own IP addresses after the bridge has been
enabled but only over the IP address of the bridge.
Procedure
Create new Bridge-ID
1. Enter an ID in the "Bridge-ID" text box.
2. Click the "Create" button. A new entry is generated in the table.
3. Click the "Set Values" button.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
forwarded to all other ports of the Inter-VLAN bridge with unchanged tag. No
frames are forwarded from ports that do not belong to the Inter-VLAN Bridge to
ports that belong to the Inter-VLAN bridge.
ports of the Inter-VLAN bridge without tag.
associations of the affected VLANs.
Configuring with Web Based Management
4.5 "Layer 2" menu
257