Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 79

• DDNS Status
If a dynamic DNS service is used, the host name of the device is displayed, e.g.
example.no-ip.com. The status of the update is also displayed.
– update successful
– update failed
– status unkown
• Fault Status: Displays the error status of the device.
Buttons you require often
The WBM pages contain the following standard buttons:
Refresh the display with "Refresh"
WBM pages that display current parameters have a "Refresh" button at the lower edge
of the page. Click this button to request up-to-date information from the device for the
current page.
Note
If you click the "Refresh" button, before you have transferred your configuration changes
to the device using the "Set Values" button, your changes will be deleted and the
previous configuration will be loaded from the device and displayed here.
Save entries with "Set Values"
WBM pages in which you can make configuration settings have a "Set Values" button at
the lower edge. The button only becomes active if you change at least one value on the
page. Click this button to save the configuration data you have entered on the device.
Once you have saved, the button becomes inactive again.
Note
Changing configuration data is possible only with the "admin" role.
Note
The changes take immediate effect. But it takes some time for the changes in the
configuration to be stored.
Create entries with "Create"
WBM pages in which you can make new entries have a "Create" button at the lower
edge. Click this button to create a new entry.
Delete entries with "Delete"
WBM pages in which you can delete entries have a "Delete" button at the lower edge.
Click this button to delete the previously selected entries from the device memory.
Deleting also results in an update of the page in the WBM.
Page down with "Next"
On WBM pages with a lot of data records the number of data records that can be
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
Update successful
Update unsuccessful
Status unknown
Configuring with Web Based Management
4.3 "Information" menu
79