Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 87

Description
• Severity Filters
You can filter the entries in the table according to severity. To display all the entries,
enable or disable all parameters.
Note
For each severity, a maximum of 400 entries in the table are possible. If the maximum
number of entries is reached for a severity, the oldest entries of this severity are
overwritten in the table. The table remains permanently in the memory.
– Critical
– Warning
– Info
The table has the following columns:
• Restart
Counts the number of restarts since you last reset to factory settings and shows the
device restart after which the corresponding event occurred.
• System Up Time
Shows the time the device has been running since the last restart when the described
event occurred.
• System Time
Shows the date and time when the described event occurred. If no system time is set,
the box displays "Date/time not set".
• Severity
Sorts the entry into the categories above.
• Log Message
Displays a brief description of the event that has occurred.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
Critical
When this parameter is enabled, all entries of the category "Critical" are displayed.
warning
When this parameter is enabled, all entries of the category "Warning" are
displayed.
Informative
When this parameter is enabled, all entries of the category "Info" are displayed.
Configuring with Web Based Management
4.3 "Information" menu
87