Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 7

Security information
Siemens provides products and solutions with industrial security functions that support
the secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art
industrial security concept. Siemens' products and solutions constitute one element of
such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the internet if and to the extent such a connection
is necessary and only when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.
For additional information on industrial security measures that may be implemented,
please visit
https://www.siemens.com/industrialsecurity
(https://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they
are available and that the latest product versions are used. Use of product versions that
are no longer supported, and failure to apply the latest updates may increase customer's
exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security
RSS Feed under
https://www.siemens.com/industrialsecurity
(https://www.siemens.com/industrialsecurity).
Firmware
The firmware is signed and encrypted. This ensures that only firmware created by
Siemens can be downloaded to the device.
Device defective
If a fault develops, please send the device to your Siemens representative for repair.
Repairs on-site are not possible.
Decommissioning
Shut down the device properly to prevent unauthorized persons from accessing
confidential data in the device memory.
To do this, restore the factory settings on the device.
Also restore the factory settings on the storage medium.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
Introduction
7