Openvpn; General - Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

• Port (Range)
Specify the port via which the VPN tunnel can communicate. The setting applies
specifically to the specified port
– If the setting is intended to apply to a port range, enter the range with start port "-"
– If the setting is intended to apply to all ports, enter "*".
The setting is only effective for port-based protocols.
• Auto Firewall Rules
– enabled
– disabled
4.7.7

OpenVPN

4.7.7.1

General

On this WBM page, you enable the OpenVPN functionality.
Description
The page contains the following:
• Activate OpenVPN
Enable or disable OpenVPN.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
end port, for example 30 - 40.
For the VPN connection, the firewall rules for access from "External" to "Internal"
and vice versa are created automatically. You can enable access to specific
services of the device under "Security" > "Firewall" > "Predefined IPv4". Ping is
enabled by default.
You will need to create the firewall rules yourself.
Configuring with Web Based Management
4.7 "Security" menu
337