Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 247

Description of the displayed boxes
In the table you can specify the limit values for the measured received power too be
monitored and the calculated power loss.
• Port
Shows the optical ports that support Fiber Monitoring. This depends on the
transceivers.
• Status
Enable or disable Fiber Monitoring.
As default, the function is disabled.
• Rx Power [dBm] Maintenance Required (Warning)
Specify the value at which you are informed of the deterioration of the received power
by a message of the severity level "Warning".
If you enter the value "0", the received power is not monitored.
The default value depends on the relevant transceiver.
• Rx Power [dBm] Maintenance Demanded (Critical)
Specify the value at which you are informed of the deterioration of the received power
by a message of the severity level "Critical".
If you enter the value "0", the received power is not monitored.
The default value depends on the relevant transceiver.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
Configuring with Web Based Management
4.5 "Layer 2" menu
247