Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual page 286

Configuring with Web Based Management
4.7 "Security" menu
• Password Confirmation
Enter the password again to confirm it.
• Role
Select a role.
You can choose between system-defined and self-defined roles, refer to the page
"Security > Users > Roles".
The table contains the following columns:
• Select
Select the check box in the row to be deleted.
Note
The preset users as well as logged in users cannot be deleted or changed.
• Account
Shows the user name.
• Role
Shows the role of the user.
• Description
Displays a description of the user account. The description text can be up to 100
characters long.
• Remote access
– Only
– None
– Additional
Procedure
Note
Changes in "Trial" mode
Even if the device is in "Trial" mode, changes that you carry out on this page are saved
immediately.
286
Only remote access, which means no rights other than logging into the WBM page
for user-specific firewall.
No remote access. The user cannot log in to the user-specific firewall, but only to
the WBM of the device.
The user can log in to both the WBM of the device and the user-specific firewall.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03