Blocking - Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

4.5.9.2

Blocking

Disabling the forwarding of unknown multicast frames
On this page, you can block the forwarding of unknown multicast frames for individual
ports.
Description of the displayed values
Table 1 has the following columns:
• 1st column
Shows that the settings are valid for all ports of table 2.
• Setting
Select the setting from the drop-down list. You have the following setting options:
– Enabled
– Disabled
– No change
• Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
Table 2 has the following columns:
• Port
All available ports are listed in this column. Unavailable ports are not displayed.
• Setting
Enable or disable the blocking of multicast frames.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
Blocking of multicast frames is enabled.
Blocking of unknown multicast frames is disabled.
Table 2 remains unchanged.
Configuring with Web Based Management
4.5 "Layer 2" menu
255