Table of Contents
Advertisement
2 Product Overview
Circuit Breaker
The machine is provided with a circuit breaker.
In the event of a current leakage, the breaker will automatically cut off the power circuit
to prevent any leakage or fire from occurring.
The <RESET> button is normally
in a pressed-in state as shown in
the figure on the right. When the
machine is to be left unused for a
long period of time or is to be
moved, lightly press the <TEST>
button with the tip of a ball-pen or
other fine-tipped object to cancel
the pressed-in state of the
<RESET> button.
2
Once a month, check the breaker for correct operation. Also, make sure that it is
earthed. If not, the breaker cannot detect current leakage which can cause electric
shock.
If you notice any unusual conditions, contact our Customer Support Center.
Note
36
• The <RESET> button automatically turns the power off when current leakage is
detected.Normally, do not operate this button.
• Before you cancel the pressed-in state of the <RESET> button, first make sure that the
power switch is off.
<TEST> button
<RESET> button
Advertisement
Table of Contents
