Table of Contents
Advertisement
17 Appendix
Notes and Restrictions on the Use of the iFax Feature
17
580
Mailbox
Automatic forwarding of a stored document,
automatic fax/iFax transmission
Printing of a stored document (Fax Private
Polling/Fax to Mailbox) instructed from the
control panel
Printing of a stored document (scanned
document/print document) instructed from the
control panel
Automatic printing of a stored document
Job Flow
Execution of a job flow sheet instructed in
Sheet
[Mailbox] or [Job Flow Sheets] on the touch
screen
O The job can be executed during the interrupt mode.
X
The job cannot be executed during the interrupt mode.
The job request is accepted, but cannot be executed during the interrupt mode.
*1 The job instruction from the control panel is required/not required to execute the job.
*2 Regular Print, the first set of Sample Print, Delayed Print (auto print)
*3 Security Print, Private Print, Sample Print, Delayed Print, Charge Print
Note
• The followings jobs are executed regardless of the interrupt mode.
- Automatic fax transmission (to mailbox/relay broadcast)
- Fax reception
Notes on E-mail Transmissions
"Doc. Sent" that appears on the communications confirmation screen, activity report,
or transmission report indicates that an e-mail has been delivered to the SMTP server,
which was configured on the machine for transmitting e-mail. The e-mail, however, may
not reach its destination for some problem over the Internet. In such case, the machine
will not be notified of such transmission error. After sending an important e-mail, we
suggest you to confirm it is received, such as by calling the recipient.
Feature Combinations when Transmitting an iFax
[Resolution] on the [Basic Features] screen
When [TIFF-S] is selected for [iFax Profile] on the [Send Options] screen, [Superfine
(400 dpi)] or [Superfine (600 dpi)] cannot be selected.
For information on iFax profiles, refer to "iFax Profile (Specifying iFax Profiles)" (P.138).
[Communication Mode] on the [Send Options] screen
The communication mode can be specified only when sending e-mail using the fax
gateway feature. For other cases, e-mail is sent via G3 Auto.
For information on the fax gateway feature, refer to "Sending an iFax to Normal Fax Machine via a
Relay Station" (P.109).
[Scan Size] on the [Scan Options] screen
When [TIFF-S] is selected for [iFax Profile] on the [Send Options] screen, iFax is sent
in A4 even if a size larger than A4 is specified.
For information on iFax profiles, refer to "iFax Profile (Specifying iFax Profiles)" (P.138).
Not
X
required
Required
O
Required
X
Not
X
required
Required
O
Advertisement
Table of Contents
