Banner Sheet; Ram Disk; Substitute Tray - Fuji Xerox DocuPrint P355 d User Manual

• Banner Sheet

NOTE:
• Banner Sheet feature is available only when the optional 250 sheet feeder is installed on the printer.
Purpose:
To specify the position of banner sheet, and also specify the tray in which the banner sheet is loaded.
Values:
Insert Position Off
Start Sheet
End Sheet
Start&End
Sheet
Select Tray Bypass Tray
Tray1
Tray2
*1
Tray2 is available only when the optional 250 sheet feeder is installed.

• RAM Disk

NOTE:
• RAM Disk feature is available only when the optional 512MB memory is installed on the printer.
Purpose:
To allocate memory to the RAM disk file system for the Secure Print and Sample Print features. The change
becomes effective after the printer is turned off and then on again.
Values:
Disable
*
Enable 200MB
50-350MB
NOTE:
• Restart your printer when you change the settings for the RAM Disk menu.

• Substitute Tray

Purpose:
Specifies whether to use paper of a different size when the paper that is loaded in the specified tray does not match
the paper size settings for the current job.
Values:
*
Off
Larger Size
Closest Size
Bypass Feed
*
Does not print the banner sheet.
Inserted before the first page of every job.
Inserted after the last page of every job.
Inserted before the first page of every job and after the last page of
every job.
The banner sheet is loaded in the bypass tray.
*
The banner sheet is loaded in the standard 250 sheet tray.
*1
The banner sheet is loaded in the optional 250 sheet feeder.
Does not allocate memory to the RAM disk file system. Secure Print
and Sample Print jobs will abort and be recorded to the job log.
*
Sets the allocation of memory to the RAM disk file system in
increments of 50 MB.
No tray size substitute accepted.
Substitutes paper of next largest size. When there is no larger paper
size, the printer substitutes paper of nearest size.
Substitutes paper of nearest size.
Substitutes paper from the bypass tray.
Using the Operator Panel Menus
169