Removing Memory - Fujitsu M10-4 Service Manual

9.8

Removing Memory

This section describes the procedure for removing memory.
When replacing a CPU memory unit, you need to remount the memory. Mount the
memory in the same mounting locations as in the replaced unit.
For memory removal, see
remove memory accordingly.
Caution - Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see
on Static
1. Move the latch of the memory slot outward, and then remove the memory by
pulling it straight up.
Note - Place the removed memory on a grounded static-removal ESD mat.
Figure 9-60 Removing memory
272 Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ June 2023
"2.2 Checking the Memory Configuration
Electricity."
Rules," and
"1.5 Precautions