Hardware Installation Tips - Agilent Technologies E7474A Getting Started Manual

Setting Up Your System

Hardware Installation Tips

Hardware Installation Tips
Item
Hardware security key
Power supply connections
PC turn on
Create a project
Agilent Wireless Solutions
Information
The hardware security key must be connected to the parallel port
of the PC. The application runs with a limited feature set without
the key. You cannot configure projects or collect data without the
key.
Make sure that power supply connections to the GPS, the
receiver, the PC, and the phones (if applicable) are correct.
After all cables are connected, turn on the PC. The PC should
be the last device you turn on.
Make sure your hardware is properly configured.
1 Verify hardware type and COM port settings.
2 Open application and choose a project from the Project drop-
down list that best represents your hardware configuration.
3 Click Configuration and go to Hardware tab. Verify or add
descriptions to complete hardware configuration or use the
Automatic Configuration wizard (refer to
Configuration" on page 23).
4 Click Collection to verify that there are no COM errors. If
errors appear, repeat previous steps or refer to
Problems and Updating Your System" on page
5 Click Save As and name current project.
6. Set project as default project under Tools > Options >New
Project and click OK.
"Automatic
"Solving
157.
21