Mitsubishi Electric FR-E700 Instruction Manual page 57

Wiring
Wire removal
Pull the wire with pushing the open/close button all the way down firmly with a flathead screwdriver
CAUTION:
E
● Use a small flathead screwdriver (tip thickness: 0.4 mm/tip width: 2.5 mm, such as SZF 0-
0.4x2.5 of Phoenix Contact Co., Ltd.). If a flathead screwdriver with a narrow tip is used,
terminal block may be damaged.
● Place the flathead screwdriver vertical to the open/close button. In case the blade tip slips,
it may cause to damage of inverter or injuries.
FR-E700 SC EC/ENE
Fig. 3-13:
Wire removal
Open/close button
Flathead screwdriver
Control circuit specifications
I001988E
3 - 21