Mitsubishi Electric FR-E700 Instruction Manual page 298

Monitor display and monitor output signals
Display set frequency during stop (Pr. 52)
When "100" is set in Pr. 52, the set frequency and output frequency are displayed during stop and op-
eration respectively. (LED of Hz flickers during stop and is lit during operation.).
Output frequency
Output current
Output voltage
Alarm display
Tab. 6-36: Display during running and stop
The set frequency displayed indicates the frequency to be output when the start command is
on. Different from the frequency setting displayed when Pr. 52 = "5", the value based on maxi-
mum/minimum frequency and frequency jump is displayed.
NOTES During an error, the output frequency at error occurrence appears.
During MRS, the values displayed are the same as during a stop.
During offline auto tuning, the tuning status monitor has priority.
6 - 144
0
During Running/Stop
Output frequency
Parameter 52
100
During Stop During Running
Set frequency Output frequency
Output current
Output voltage
Alarm display
Parameter