Wiring
The line voltage drop can be calculated by the following expression:
Line voltage drop [V]
Use a larger diameter cable when the wiring distance is long or when it is desired to decrease the volt-
age drop (torque reduction) in the low speed range.
CAUTION:
E
● Tighten the terminal screw to the specified torque. A screw that has been tightened too
loosely can cause a short circuit or malfunction. A screw that has been tightened too tightly
can cause a short circuit or malfunction due to the unit breakage.
● Use crimping terminals with insulation sleeve to wire the power supply and motor.
FR-E700 SC EC/ENE
3 wire resistance [m /m
=
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Main circuit connection
wiring distance [m] current [A]
1000
3 - 11