Mitsubishi Electric FR-E700 Instruction Manual page 515

Parameter
Instruction codes
Set the instruction code using a remote register (RWw) (Refer to page 6-358.)
The definition read by the instruction code is stored in the remote register (RWr). (Refer to page 6-359.)
Item
Operation mode
Output fre-
quency/
speed
Output
current
Output
voltage
Special
monitor
Special
monitor
selection No.
Faults
history
Set frequency
(RAM)
Set frequency
(E²PROM)
Set frequency
(RAM)
Set frequency
(RAM and
E²PROM)
Parameter
Tab. 6-161: Setting of the instruction codes and data (1)
FR-E700 SC EC/ENE
Read/ Instruc-
tion code Description
write
H0000: Network operation mode
H0001: External operation mode, External JOG operation mode
Read H7B
H0002: PU operation mode, External/PU combined operation mode 1 and 2,
H0000: Network operation mode
Write HFB H0001: External operation mode
H0002: PU operation mode (Pr. 79 = "6")
H0000 to HFFFF
Read H6F Output frequency: Increments 0.01 Hz
Machine speed: Increments 1 (When Pr. 37 "0")
H0000 to HFFFF
Read H70
Output current (hexadecimal): Increments 0.01 A
H0000 to HFFFF
Read H71
Output voltage (hexadecimal): Increments 0.1 V
H0000 to HFFFF
Read H72
Check the data of the monitor selected by the instruction code HF3.
H01 to HFF
Read H73
Monitor selection data
Write HF3
(Refer to monitor code on page 6-363.)
H0000 to HFFFF: Last two fault records
b15
H74 Second fault in past
H75
H76
H77
H74 to
Read
H77
Monitor example for faults history (instruction code H74)
Read data: H30A0
Second fault in past: THT
Latest fault: OPT
b15
0 0 1 1 0 0 0 0
Second fault in past
For the data codes or details of fault records, refer to page 7-2.
Read the set frequency/machine speed from the RAM or E²PROM.
H6D
H0000 to HFFFF:
Read
Set frequency: 0.01Hz increments
H6E
Machine speed: 1 increments (When Pr. 37 "0")
Write the set frequency/machine speed into the RAM or E²PROM.
Write HED
H0000 to H9C40 (0 to 400.00Hz):
Frequency: 0.01Hz increments
H0000 to H270E (0 to 9998):
Machine speed: 1 increments (When Pr. 37 "0")
Write HEE
To change the set frequency consecutively, write data to the inverter RAM.
(Instruction code: HED)
H00 to
Refer to the instruction code in the appendix (page A-16) to read and write
Read
H63
as required.
Write to Pr. 77 and Pr. 79 is disabled.
When setting Pr.100 and later, set link parameter extended setting.
H80 to
Set 65520 (HFFF0) as a parameter value "8888" and 65535 (HFFFF) as "9999".
Write
HE3
When changing the parameter values frequently, set "1" in Pr. 342 to write
them to the RAM. (Refer to page 6-245)
PUJOG operation mode
b8 b7
Latest fault
Fourth fault in past Third fault in past
Sixth fault in past Fifth fault in past
Eighth fault in past Seventh fault in past
b8 b7
1 0 1 0 0 0 0 0
Latest fault
(H30) (HA0)
CC-Link IE Field Network Basic
b0
b0
6 - 361