Parameter
Current monitoring reference (Pr. 56)
Set the full scale value when outputting the current monitor from terminal AM. Set the current to be
referenced when the current monitor (inverter output current, etc.) is selected for terminal AM dis-
play.
● Set the current value when the voltage output at terminal AM is 10 V DC. The analog voltage
output and current value at terminal AM are proportional. (The maximum output voltage is
10 V DC.)
10 V DC
FR-E700 SC EC/ENE
500 A
Rated output current
(initial value)
Setting range of Pr. 56
Monitor display and monitor output signals
Fig. 6-74:
Current monitoring reference
I001165E
6 - 149