Set Nrtvbr Administrative Weight - 3Com CoreBuilder 7000 Management Manual

C 13: C
428
HAPTER ONFIGURING AND
Set NrtVBR
Administrative
Weight
M PNNI (F
ANAGING
Sets the NrtVBR Administrative Weight parameter. The NrtVBR
administrative weight is the administrative weight of this interface port
for the non-real-time variable bit rate service category.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
NrtVBR admin weight
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 4 2 4 6000
The following message is displayed:
Default value is 5040, new value is set to 6000
Press ENTER to continue...
E V O
OR THE XTENDED ERSION
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(4) ICF: Interface Configuration
(2) IPR: Interface Parameters
(4) NVW: NrtVBR Admin Weight
Format or Range
1 - 2147483647
1 1 10 4 4 2 4 [parameters]
The NrtVBR admin weight parameter is updated to its
new value.
Default Value is 5040, New value is
set to <n>.
)
NLY