3Com CoreBuilder 7000 Management Manual page 157

Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Table 22 describes the IME and scope parameters displayed by the
command.
.
Table 22 IME and Scope Parameters
Name Description
Port ID ATM port id.
ATM address - Network prefix of ATM address
Network prefix
ATM address - User part of ATM address
User part
(1) ADD: ATM addresses
(4) SCO: IME addresses & scope
Format or Range
slot.port (0.0 for all ports)
3 1 4 [parameters]
The IME addresses for the specified port are displayed.
Information is displayed as shown in the example
below.
ILMI ATM Addresses 157