3Com CoreBuilder 7000 Management Manual page 167

Table 23 Call Parameters
Name
Call ID
Call Type
Call State
Number of Out
Connections
Priority
CLL (Cell Loss Level)
Time of Last Change of
Operational State
In Connection VPI
In Connection VCI
In Connection Port ID
In Connection ATM
Address Member
Out Connection VPI
Out Connection VCI
Out Connection Port
ID
Out Connection ATM
Address
Out Connection ATM
Address Member
Description
The unique number identifying the call.
Whether the call is SVC or PVC, and if it is a point-to-point
or point-to-multipoint call.
When showing a connection of LAN Emulation, Control
point-to-point indicates use of the control direct VCC (for
LES), or the multicast sent VCC (for BUS).
When showing a connection of point-to-multipoint, it
indicates use of the control distribute VCC (for LES) or
Multicast forward VCC (for BUS).
Whether the call is active or not.
The number of output destinations that the call is routed
to. In a point-to-point call this is always one, whereas in a
point-to-multipoint call, this number may be greater than
one.
Whether the call cells are transferred through the switch
to the high priority queue or low priority queue.
The queue saturation level at which cells with their CLP bit
set are discarded. The possible values can be: no discard,
20%, 50%, 80%. The default value is 50%. For a
point-to-multipoint call, the value is constant at 80%.
The interval, in msecs, since the operational state of the
call was last changed.
The Virtual Path Identifier (VPI) number of the input port.
The Virtual Channel Identifier (VCI) number of the input
port.
The port ID of the input port.
The ATM address member of the source (if the source is
not SVC, this field is empty).
The Virtual Path Identifier (VPI) number of the output port.
The Virtual Channel Identifier (VCI) number of the output
port.
The port ID of the output port.
The ATM address of the destination. If the destination is
not SVC, this field is empty.
The ATM address member of the destination. If the source
is not SVC, this field is empty.
Display Call Routing 167