3Com CoreBuilder 7000 Management Manual page 448

C 13: C
448
HAPTER ONFIGURING AND
M PNNI (F
ANAGING
Table 59 PTSE Table Parameters - Node Topology Link Section (continued)
Parameter
Local Port
Remote Port
Remote Node
Table 60 PTSE Table Parameters - Node Address Section
Parameter
Address prefix
Length
Node
Table 61 PTSE Table Parameters - Peer Group Neighbor Table Section
Parameter
Remote Node Id
State
Port Count
Table 62 PTSE Table Parameters - Summary Address Table Section
Parameter
SNMP Node Index
Internal Summaries
Address
Length
Supp
State
E V O
OR THE XTENDED ERSION
Description
The number of the local port that connects to the
remote port.
The number of the remote port that connects to the
local port.
The node ID of the remote port.
Description
The address of node within the peer group.
The number of significant bits of the ATM address that
are used for route calculation.
The address of the node originating the PTSE.
Description
The node ID of the remote port.
The operational status of the link between the two
neighbor nodes. The state may be: Full, Up, Down,
Negotiating, Exchanging, Loading or Unknown.
The number of ports via which two neighbors
connect.
Description
The node index.
The reachable address prefix for all nodes in a
specified peer group.
The number of significant bits of the specific summary
ATM address that are used for route calculation.
Indicates whether or not to suppress the address. No
propagates the address to the peer group, Yes does
not advertise the address.
Indicates whether or not the summary address is
currently being advertised to the peer group. The state
may be: Advertising, Suppressing or Inactive.
)
NLY