Release Pvc Destination - 3Com CoreBuilder 7000 Management Manual

C 7: C
186
HAPTER ONFIGURING
Release PVC
Destination
V C
IRTUAL HANNELS
Releases a single destination connection (branch) from a
point-to-multipoint call. Specify the P2M call ID and the output port
number and VPI/VCI of the destination connection.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Call ID of the P2M
connection
Destination connection
port ID
Destination connection
VPI
Destination connection
VCI
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 4 1 5 1 3.4 1 60
The following message is displayed:
An Outgoing VC with
was released.
The additional connection with output port 3.4 and VPI/VCI values of
1/60, which was added to the P2M connection with call ID 1, is released.
(4) S&C: Setup and Config Conns
(1) PVC: PVC operations
(5) REO: Release Out VC from call
Format or Range
Integer. See (3)CON\(2)RTG\(1)CLL to get Call
IDs for a port.
slot.port
See (3)CON\(4)S&C\(1)PVC for VPI/VCI limits
See (3)CON\(4)S&C\(1)PVC for VPI/VCI limits
3 4 1 5 [parameters]
A PVC call destination with parameters specified is
released.
An Outgoing VC with
was released.
call ID: 1,
VPI: 1,
VCI: 60,
call ID:
VPI:
VCI: