Add A Lec To Security List - 3Com CoreBuilder 7000 Management Manual

Add a LEC to Security
List
Adds a LEC or group of LECs to the security list of the specified ELAN for
the current session. You specify the join privilege.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
LEC ATM address or
Network Prefix
Join Privilege
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 3 2 4 1 47.0.0.0.0.0.3c.0.0.a0.* 2
The LECs with the specified network prefix are added to the ELAN
security list for the ELAN with ID 1 with join privilege Reject.
LECs in ELAN Security List
(2) LEM: LAN Emulation
(3) SEC: LE Security Configuration
(2) STB: Security tables entries
(4) ADR: Add a new security entry
Format or Range
1–16
See "Display ELAN Parameters in LES Database" on
page 322.
A full ATM address of a LEC, in the format of 20 bytes,
separated with dots
A prefix of the network part (1 to 13 bytes) of an ATM
address for a section of the network (that is, prefix and
"wildcard"):
The format is:
47.0.0.0.0.0.3c.0.0.a0.* — between 1-12 bytes, with
".*" at the end,
or
47.0.0.0.0.0.3c.0.0.a0.0.0.0* — exactly 13 bytes long,
with "*" at the end (no ".")
1–Accept
2–Reject
2 3 2 4 [parameters]
The specified LECs are added to the ELAN security list.
Entry added successfully
363