Update Efci Threshold - 3Com CoreBuilder 7000 Management Manual

Update EFCI Updates the EFCI Threshold in the CoreBuilder 7000 switch.
Threshold
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
EFCI Threshold
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following prompt is displayed:
Enter parameter(s): 'EFCI thresh
(0-Disable,Full:1-20%,2-50%,3-80%)' 2
The following message is displayed:
The EFCI threshold is updated to 50%.
(1) SET: Switch setup
Format or Range
0-Disable, Full
1-20%
2-50%
3-80%
1 1 7 2 [parameters]
The EFCI Threshold is updated.
The EFCI threshold is updated to n%
1 1 7 2 2
(7) FCI: EFCI threshold setup
(2) SET: Set & save EFCI threshold
EFCI Threshold 99