Lec Operations; Display Lec Connection Info - 3Com CoreBuilder 7000 Management Manual

LEC Operations

Display LEC
Connection Info
The following commands allow you to configure the LEC operations.

Display LEC Connection Info

Display LEC Address Info
Displays LAN emulation clients (LEC) connection information for a
specified ELAN and specified LEC.
A LEC is specified by its ID. In order to determine the ID of a specific LEC,
first perform this command with a value of 0 for LEC ID (as in the
example below). All LEC IDs will be displayed. Select the ID of the LEC for
which you want information and perform the command again with the
desired LEC ID.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
LEC ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 2 3 2 1 0
(2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Info
(2) INF: Clients Info
Format or Range
1–16
See "Display ELAN Parameters in LES Database" on
page 322.
0- For all
2 2 3 2 [parameters]
The LEC connection information for the specified ELAN
and LEC ID is displayed.
Information is displayed as shown in the example
below.
LEC Operations 343