3Com CoreBuilder 7000 Management Manual page 278

C 9: M
278
HAPTER ANAGING
LAN E S
MULATION ERVICES
MPOA Client Configuration Parameters
.
Table 40 MPOA Client Configuration Parameters
Name
shortcut-setup frame count
shortcut-setup frame time
flow detection protocols
MPC initial retry time
MPC retry time maximum
hold down time
Description
See parameter "shortcut-setup frame time".
Minimum=1, default=10, maximum=65535.
If an MPC forwards at least MPC-p1 frames
to the same target within any period
(MPC-p2) via the default forwarding path, it
should initiate the procedure to establish a
shortcut. These parameters specify a default
mechanism for automatically detecting flows
in the absence of other information. Other
mechanisms (e.g., RSVP) may be used in
specific cases to override this default.
Minimum=1 sec., default=1 sec., maximu=60
sec.
A set of protocols on which to perform flow
detection.
Initial retry time used by the MPOA retry
mechanism. Minimum=1 sec., default=5 sec.,
maximum=300 sec.
Maximum retry time used by the MPOA retry
mechanism. Minimum=10 sec., default=40
sec., maximum=300 sec.
Minimum time to wait before reinitiating a
failed resolution attempt. This is usually set to
a value greater than the retry time maximum.
Minimum=30 sec., default=MPC-p5*4,
maximum=1200 sec.