3Com CoreBuilder 7000 Management Manual page 50

C 3: G
50
HAPTER ENERAL
T
ASKS
Example - Uploading all configuration parameters
In this example, single-IP mode is enabled.
Enter: 1 3 6
1 Select the module whose configuration data you want to upload to disk
from a list of the installed modules displayed according to slot number.
Enter to select the switch module:
1
Module Types:
1<Switch module 7000>
Select Module: 1
2 Select the configuration data you want to upload to disk from a list of the
data types displayed. Enter
File Types:
1<All>
2<Box Profile>
3<ATM Addresses>
4<PNNI Configuration>
5<LANE Security>
6<PVC Connections>
7<LECS Topology>
8<LECS Order List>
9<Other>
Select File type: 1
3 Enter the TFTP server IP address:
4 Enter the name of file (without an extension) to be written to the server
to contain the uploaded data:
The configuration parameters are uploaded to seven different files with
sequential file extensions: switch/cfg/24_7_cfg.1 to
switch/cfg/24_7_cfg.7
5 The success status of the upload is displayed as follows:
2<Slot 3 - 7600 Fast>
3<Slot 4 - 7600 Fast>
4<Slot 5 - 7400 Ether>
5<Slot 6 - 7200 Ether>
to upload all configuration data:
1
100.0.0.111
switch/cfg/24_7_cfg