Reset Aal5-Layer Control Statistics - 3Com CoreBuilder 7000 Management Manual

C 8: V
246
HAPTER IEWING
Reset AAL5-Layer
Control Statistics
S
TATISTICS
Resets AAL5-layer control statistics for a specified port.
Command Actions
Enter the menu sequence: (4) STS: Statistics
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
4 5 2 3.1
The AAL5-layer control statistics are reset for port <3.1>.
(5) CTL: Control frames
(2) RES: Reset Control frames
Format or Range
slot.port (0.0 for all ports)
4 5 2 [parameters]
AAL5-layer control statistics are reset for the specified
port.
Information is displayed as shown in the example
below.