Update Write Community String Address - 3Com CoreBuilder 7000 Management Manual

Update Write
Community String
Address
Updates the Write Community String of the CoreBuilder 7000 family
ATM switch. The Write Community String is updated after the next
reboot of the switch.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Write Community String
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 2 6 2 private
The Write Community String is updated to private.
Setting Up for Management
(1) SET: Switch setup
(2) MNG: Management setup
(6) SET: Set Comm. String Setup
(2) SET: Set & save Set Comm.
String
Format or Range
alphanumeric string up to 19 characters (normally set
to "public" or "private")
1 1 2 6 2 [parameters]
The Write Community String is updated after the next
reboot of the switch.
Set community string was set for next reboot.
81