3Com CoreBuilder 7000 Management Manual page 177

Conn Call Port
id id id
---- ---- ----
1 1
3.2
3 2
3.2
7 3
3.2
9 4
3.2
16 5
3.2
18 6
3.2
22 7
3.2
24 8
3.2
25 9
3.2
Member Conn Conn
id type VPI/VCI
------ ------- ------- ------ ------
101 SVC,P2P 2/393Active Active
101 SVC,P2P 2/394Active Active
101 SVC,P2P 2/395Active Active
101 SVC,P2P 2/396Active Active
101 SVC,P2M 2/397Active Active
101 SVC,P2M 2/398Active Active
101 SVC,P2M 2/399Active Active
101 SVC,P2M 2/400Active Active
101 SVC,P2P 2/401Active Active
Port Static Connection Parameters
Table 27 shows the port static connection parameters displayed by the
command.
Table 27 Port Static Connection Parameters
Name
Connection ID
Call ID
Port ID
Member ID
Connection Type
Connection VPI
Connection VCI
Internal VPI
Internal VCI
Number of parties
Operational Status
Administration Status
Originator
Display Virtual Channels at Port
Oper Admin
status status
Description
A number identifying the connection (VPI/VCI).
A number identifying the call.
A number identifying the port.
Sequential numbering of ATM addresses registered at a
port. Used to specify SVC.
Whether the connection is using SVC or PVC, and whether
it is a point-to-point or point-to-multipoint call.
The Virtual Path Identifier (VPI) value defined for the
connection.
The Virtual Channel Identifier (VCI) value defined for the
connection.
The VPI associated with the internal connection
The VCI associated with the internal connection
The number of parties for P2M connection
The operational status of the connection, active or not.
The administration status of the connection, active or not.
Whether the connection originates at the calling UNI or
the called UNI.
Originator Clp
---------- --
Calling N
Calling N
Calling N
Calling N
Called N
Called N
Called N
Called N
Calling N
177