3Com CoreBuilder 7000 Management Manual page 497

Atm switches
Hide thumbs Also See for CoreBuilder 7000:
Table of Contents

Advertisement

Ethernet
ELAN name
ESI
external clock
external clock source
port
flooding
foreign address
horizontal links
header
HEC
hello packet
quality of service class makes use of explicit forward congestion
indication.
A CSMA/CD, 10 Mbps, local area data network, developed by Xerox
Corporation. It is one of the most popular baseband LANs in use.
The name assigned an ELAN (Emulated Local Area Network).
End System Identifier. This identifier distinguishes multiple nodes at the
same level in case the lower peer group is partitioned.
Clock that comes through an RX channel into an on-board port.
The on-board port that supplies the external synchronization clock,
which is distributed to all other on-board 8-port ports. Only a single
port of this type can exist in a box. Only on-board ports can function as
an external clock source port.
F
This is an advertising mechanism in PNNI and ensures that each node
maintains an identical topology database.
An address that does not match any of a given node's summary
addresses.
H
A link between two logical nodes that belong to the same peer group.
Protocol control information located at the beginning of a protocol
data unit.
Header Error Control. Using the fifth octet in the ATM cell header, ATM
equipment may check for an error and correct the contents of the
header. The check character is calculated using a CRC algorithm
allowing a single bit error in the header to be corrected or multiple
errors to be detected.
A type of PNNI routing packet that is exchanged between neighboring
logical nodes.
G
497
LOSSARY

Advertisement

Table of Contents
loading

This manual is also suitable for:

Corebuilder 7000 series

Table of Contents