Call Admission Control; Display Cac Parameters - 3Com CoreBuilder 7000 Management Manual

Call Admission
Control
Display CAC
Parameters
The following command allows you to display information about the call
admission control process at a port.
Display the parameters used in the GCAC algorithm for call admission
control at a port.
For more information about call admission control and the GCAC
algorithm, see "Call Admission Control" on page 5-117. Also, "Display
Call Routed to ATM Address" on page 165 for examples of how call
contract parameters are displayed for a call.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 5 1 0.0
The following CAC information for all ports is displayed:

Call Admission Control

(5) CTM: Traffic Management info
(1) CAC: Show port CAC parameters
Format or Range
slot.port (0.0 for all)
3 5 1 [parameters]
The CAC parameters for the port are displayed.
Information is displayed as shown in the example
below.
219