Display Lecs-Address Access Status - 3Com CoreBuilder 7000 Management Manual

C 6: ILMI C
134
HAPTER
Display LECS-Address
Access Status
ONFIGURATION
Displays the current communication channel between LEC and LECS for
the specified port of the CoreBuilder 7000 family ATM switch. The
LECS-via-ILMI parameter determines whether the LEC that is attached to
the port will retrieve the LECS address by ILMI or by the "well-known"
address. For more information, "LECS Address Access" on page 148 in
the Operations Guide.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 8 4 1 3.2
The following message is displayed:
LECS via ILMI is ENABLED.
(1) SET: Switch setup
(8) IME: ILMI setup
(4) MIB: ILMI MIB View setup
(1) GET: Get LECS via ILMI status
Format or Range
slot.port
1 1 8 4 1 [parameters]
The LECS-via-ILMI status for the specified port is
displayed.
LECS via ILMI is ENABLED/DISABLED.