3Com CoreBuilder 7000 Management Manual page 145

local switch was originally configured to IISP (local value) and the peer
switch (remote value) was originally configured to E-IISP. The result of the
auto-discovery is that the local switch is reconfigured to E-IISP.
AutoDiscovery and System
==============================================================
-- Warning: PNNI protocol is disabled, converting PNNI ports to
EIISP.
-- Auto Discovery is enabled on this port
-- Auto Discovery has succeeded on this port
|Local Type|Remote Type|Rmt UniType|Interface Type |IME Type
1
|node
|Local Mac
2
|00c0da69f258|00c0da60283e|User Side
|Parameter Name
|================|===============|==============|================
|ILMI Version
3
|NNI Sig Ver
Flags that affects the final results
|node |private
|Remote Mac |IME TYPE
|Local Value
|ILMI 4.0
|IISP
|EIISP
|
|
|Remote Value |AutoCfg Result|
|ILMI 4.0 |ILMI 4.0
|EIISP |EIISP
ILMI Setup 145
|
|Usr |
|
|