Display Lan Emulation Services Status - 3Com CoreBuilder 7000 Management Manual

C 9: M
254
HAPTER ANAGING
Display LAN
Emulation Services
Status
LAN E S
MULATION ERVICES
Displays the status of the LAN Emulation services in the CoreBuilder 7000
family ATM switch. The status is either enabled or disabled.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 5 1 1
The following message is displayed:
LE services status is ENABLED.
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(1) LES: LE services setup
(1) STA: Show LE services status
1 1 5 1 1
The LE services status is displayed.
LE services status is ENABLED or
DISABLED.