1-Port VDSL2 (Annex A) Mini-Physical Interface Module Hardware
Specifications
Table 37 on page 74
gives the hardware specifications of the 1-Port VDSL2 (Annex A) Mini-Physical
Interface Module (Mini-PIM).
Table 37: 1-Port VDSL2 (Annex A) Mini-PIM Hardware Specifications
Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
Environmental operating temperature
Storage temperature
Relative humidity
RELATED DOCUMENTATION
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Overview | 72
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features | 73
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles | 75
1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs | 74
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Cable Specifications | 141
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Basic Configuration | 211
1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs
The 1-Port VDSL2 (Annex A) Mini-Physical Interface Module (Mini-PIM) has two LEDs.
Table 38 on page 75
describes the LED states.
Value
3.75 in. x 5.9 in. x 0.80 in.
(9.5 cm x 14.5 cm x 2.0 cm)
4.0 oz (114 g)
RJ-11
Mini-PIM
32°F through 113°F (0°C through 45°C)
–40°F through 158°F (–40°C through 70°C)
5% to 90% noncondensing
74