1-Port Vdsl2 (Annex A) Mini-Physical Interface Module Key Features - Juniper SRX Series Manual

RELATED DOCUMENTATION

1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features | 73

1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles | 75
1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs | 74
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Hardware Specifications | 74
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Cable Specifications | 141
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Basic Configuration | 211
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features
The following features are supported on the 1-Port VDSL2 (Annex A) Mini-Physical Interface Module
(Mini-PIM):
ADSL/ADSL2/ADSL2+ backward compatibility with Annex-A, Annex-M support
Packet Mode Transfer (PTM) or Ethernet in the First Mile (EFM) (802.3ah) support
Operation, Administration, and Maintenance (OAM) support for ADSL/ADSL2/ADSL2+ mode
Asynchronous Transfer Mode (ATM) quality of service (QoS) (supported only when the VDSL2 Mini-PIM
is operating in ADSL2 mode)
Multilink Point-to-Point Protocol (MLPPP) (supported only when the VDSL2 Mini-PIM is operating in
ADSL2 mode)
Support for a maximum of 10 permanent virtual connections (PVCs) (only in ADSL/ADSL2/ADSL2+
mode)
Dying Gasp support (ADSL and VDSL2 mode)
RELATED DOCUMENTATION
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Overview | 72
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles | 75
1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs | 74
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Hardware Specifications | 74
MTU Default and Maximum Values for Physical Interface Modules | 12
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Cable Specifications | 141
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Basic Configuration | 211
73