1-Port Serial Mini-Physical Interface Module Key Features; 1-Port Serial Mini-Physical Interface Module Hardware Specifications - Juniper SRX Series Manual

1-Port Serial Mini-Physical Interface Module LEDs | 64
1-Port Serial Mini-Physical Interface Module Basic Configuration | 207

1-Port Serial Mini-Physical Interface Module Key Features

The 1-Port Serial Mini-Physical Interface Module (Mini-PIM) provides the following key features:
Autoselection of operational modes based on DTE or DCE cables
Local and remote loopback diagnostics
Configurable clock rate for the transmit (TX) clock and receive (RX) clock
Complete configuration and management by using the CLI and the J-Web interface
RELATED DOCUMENTATION
1-Port Serial Mini-Physical Interface Module Overview | 62

1-Port Serial Mini-Physical Interface Module Hardware Specifications | 63

1-Port Serial Mini-Physical Interface Module Supported Standards | 65
MTU Default and Maximum Values for Physical Interface Modules | 12
1-Port Serial Mini-Physical Interface Module LEDs | 64
1-Port Serial Mini-Physical Interface Module Basic Configuration | 207
1-Port Serial Mini-Physical Interface Module Hardware Specifications
Table 33 on page 63 gives the physical specifications of the 1-Port Serial Mini-Physical Interface Module
(Mini-PIM).
Table 33: 1-Port Serial Mini-PIM Physical Specifications
Description
Dimensions (H x W x L)
Weight
Connector type
Value
0.8 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm)
3.04 oz (86 g)
60-pin Synchronous Serial (socket)
63