1-Port Adsl2+ Mini-Physical Interface Module Key Features - Juniper SRX Series Manual

Figure 9: ADSL2+ Annex B Mini-PIM Front Panel
RELATED DOCUMENTATION
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications | 47
1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications | 21
1-Port ADSL2+ Mini-Physical Interface Module Supported Standards | 48

1-Port ADSL2+ Mini-Physical Interface Module Key Features | 46

1-Port ADSL2+ Mini-Physical Interface Module LEDs | 48
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics | 49
1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration | 201
1-Port ADSL2+ Mini-Physical Interface Module Key Features
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) provides the following key features:
Automatic configuration of the ADSL after negotiating with the DSLAM
Support for ADSL, ADSL 2, and ADSL2+ protocols on the same interface card
Dying Gasp support
MLPPP on one interface
Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) encapsulation
Support of latency modes fast and interleave
Support for ATM AAL5 with CBR, VBR-nrt and UBR traffic types
Support for 10 permanent virtual circuits (PVCS)
RELATED DOCUMENTATION
1-Port ADSL2+ Mini-Physical Interface Module Overview | 45
46