8-Port Gigabit Ethernet Sfp Xpim Network Interface Specifications - Juniper SRX Series Manual

Table 16: 1-Port Clear Channel DS3/E3 GPIM Network Interface Specifications (continued)
Description
Error counters
HDLC Features
MTU
Shared flag
Idle flag/fill (0x7e or all
ones)
Counters

8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications

Table 17 on page 26 gives the network interface specifications of the 8-Port Gigabit Ethernet small
form-factor pluggable XPIM (SFP XPIM).
Table 17: 8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications
Network Interface Specification
Operating modes
DS3 Mode
Incremented during a periodic 1-second
polling routine:
Line Code Violations (LCV)
P-bit Code Violations (PCV)
C-bit Code Violations (CCV)
Line Errored Seconds (LES)
P-bit Errored Seconds (PES)
C-bit Errored Seconds (CES)
Severely Errored Framing Seconds
(SEFS)
P-bit Severely Errored Seconds (PSES)
C-bit Severely Errored Seconds (CSES)
Unavailable Seconds (UAS)
Default (4474 bytes) or maximum jumbo
(up to 9192 bytes)
Supported
Supported
Runts, giants
E3 Mode
Incremented during a periodic 1-second
polling routine:
Frame Alignment Error (FAE)
Bipolar Coding Violations (BCV)
Excessive Zeros (EXZ)
LCV
LES
SEFS
UAS
Default (4474 bytes) or maximum jumbo
(up to 9192 bytes)
Supported
Supported
Runts, giants
Value
Full-duplex and half-duplex
26