8-Port Gigabit Ethernet Sfp Xpim Key Features - Juniper SRX Series Manual

8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications | 26
8-Port Gigabit Ethernet SFP XPIM Supported Modules | 97

8-Port Gigabit Ethernet SFP XPIM Key Features | 94

8-Port Gigabit Ethernet SFP XPIM LEDs | 96
8-Port Gigabit Ethernet SFP XPIM Basic Configuration | 221
8-Port Gigabit Ethernet SFP XPIM Key Features
The 8-Port Gigabit Ethernet small form-factor pluggable XPIM (SFP XPIM) has the following key features:
8 triple-speed (10/100/1000 Mbps) Ethernet ports, double-high card
PoE not supported
PCI-Express interface for control and management
I2C interface for module monitor and identification
Maximum module power of 40.0 W without PoE
JTAG support for boundary scan test
CAUTION:
third-party optic or cable, the Juniper Networks Technical Assistance Center (JTAC)
can help you diagnose the source of the problem. Your JTAC engineer might recommend
that you check the third-party optic or cable and potentially replace it with an equivalent
Juniper Networks optic or cable that is qualified for the device.
RELATED DOCUMENTATION
8-Port Gigabit Ethernet SFP XPIM Overview | 92
8-Port Gigabit Ethernet SFP XPIM Hardware Specifications | 95
8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications | 26
8-Port Gigabit Ethernet SFP XPIM Supported Modules | 97
8-Port Gigabit Ethernet SFP XPIM LEDs | 96
8-Port Gigabit Ethernet SFP XPIM Components | 93
8-Port Gigabit Ethernet SFP XPIM Basic Configuration | 221
If you face a problem running a Juniper Networks device that uses a
94