Ethernet Port Leds; Figure 5: Srx210 Services Gateway Ethernet Port Leds - Juniper SRX210 Series Manual

Ethernet Port LEDs

Copyright © 2012, Juniper Networks, Inc.
Table 8: SRX210 Services Gateway Front Panel Components
LEDs (continued)
Component Description
3G The 3G ExpressCard LED has the following indicator
ExpressCard colors:
LED
Green and steadily on indicates that the
ExpressCard is plugged in and the data call is
established.
Red and steadily on:
Indicates that the ExpressCard plugged in is
faulty or not detected by the device.
Indicates that the ExpressCard is plugged in
but not registered with the network.
Amber and steadily on indicates that the
ExpressCard is plugged in and registered with
the network.
Off indicates that the ExpressCard is not plugged
in.
On the SRX210 Services Gateway, each Gigabit Ethernet port and Fast Ethernet port has
two LEDs. Figure 5 on page 13

Figure 5: SRX210 Services Gateway Ethernet Port LEDs

NOTE: The numbers in
Table 9 on page
Chapter 2: Hardware Components and Specifications
shows the SRX210 Services Gateway Ethernet port LEDs.
Figure 5 on page 13
14.
Usage
The 3G ExpressCard LED
provides information on the
functioning of the
ExpressCard slot.
correspond to the numbers in
13